Project Description:
- 4 place mats (approximately 16” x 12” each)
- 4-shaft repp weave
- 30 EPI, 5 total PPI (thick and thin) (12 PPI in hems)
- Warp length 4-yards, 12 ½” in reed.
Equipment Needed:
- A loom with at least 4 shafts and at least a 13” weaving width.
- 10 or 15 dent reed
- 2 shuttles, 2 bobbins
Kit Contents:
- Warp yarn: 3/2 Tubular Spectrum™ mercerized cotton Black: 1 lb; Very Dark Gray, Burnt Umber and Copper: 4 oz; Middle Gray and 5 Blue: 1.5 oz.
- Weft yarn: (thick weft) 8/16 heavy unmercerized cotton Black: 1 lb (use quadrupled).
- Weft yarn: (thin weft) 10/2 Tubular Spectrum™ mercerized cotton Black: 1.5 oz
- Instructions
Sometimes when these placemats are woven on lightweight looms, you may have sheds that don’t come out as clear as we would like. To help avoid this, use a lift plan and raise each harness separately. Click here for a downloadable lift plan. If you have purchased the kit after August 19, 2023, this lift plan will be included in the instructions.
These placemats were designed by Cynthia Newman, one of our Master Weavers!

Reviews
There are no reviews yet.