This chart will help you figure out how to use the reed that you own to reach the sett that you want to weave with.

To use the chart: In the top row, find the reed size you own. Then, find your desired epi (ends per inch) in the body of the table. Follow that row to the left-most column to get the order in which you should sley your reed.  The numbers in the left-most column indicate the number of ends that go through each slot in the reed.

For example if you have a 10 dent reed and you want to get to 15epi, you go down the 10 column until you get to 15.  Then look to the left, and see 1-2 in the left-most column.  This means in the first dent you will sley one end, and in the second dent you will sley 2 threads.  You will do this across the warp and you will then have 15 ends per inch in the reed.

Which Reed do you own?	5	6	8	9	10	12	14	15	16	18	20	24
Use the numbers shown below to sley the reed
0-0-1	2	2	3	3	3	4	5	5	5	6	7	8
0-1	2.5	3	4	4.5	5	6	7	7.5	8	9	10	12
0-1-1	3	4	5	6	7	8	9	10	11	12	13	16
0-1-1-1	4	4.5	6	7	7.5	9	10.5	11.5	12	13.5	15	18
1	5	6	8	9	10	12	14	15	16	18	20	24
1-1-1-2	6	7.5	10	11	12.5	15	17.5	19	20	22.5	25	30
1-1-2	7	8	11	12	13	16	19	20	21	24	27	32
1-2	7.5	9	12	13.5	15	18	21	22.5	24	27	30	36
1-2-2	8	10	13	15	17	20	23	25	27	30	33	40
1-2-2-2	9	10.5	14	16	17.5	21	24.5	26	28	31.5	35	42
2	10	12	16	18	20	24	28	30	32	36	40	48
2-2-2-3	11	13.5	18	20	22.5	27	31.5	34	36	40.5	45	54
2-2-3	12	14	19	21	23	28	33	35	37	42	47	56
2-3	12.5	15	20	22.5	25	30	35	37.5	40	45	50	60
2-3-3	13	16	21	24	27	32	37	40	43	48	53	64
2-3-3-3	14	16.5	22	25	27.5	33	38.5	41	44	49.5	55	66
3	15	18	24	27	30	36	42	45	48	54	60	72
3-3-3-4	16	19.5	26	29	32.5	39	45.5	49	52	58.5	65	78
3-3-4	17	20	27	30	33	40	47	50	53	60	67	80
3-4	17.5	21	28	31.5	35	42	49	52.5	56	63	70	84
3-4-4	18	22	29	33	37	44	51	55	59	66	73	88
4	20	24	32	36	40	48	56	60	64	72	80	96
4-4-5	22	26	35	39	43	52	61	65	69	78	87	104
4-5-5	23	28	37	42	47	56	65	70	75	84	93	112
5	25	30	40	45	50	60	70	75	80	90	100	120